Birkat HaBayit Wavy Home Blessing Plaque Silicone Mold with Stand

Cast a freestanding decorative Hebrew blessing plaque with an asymmetric, gently wavy edge and a matching rectangular display pedestal. There are two text designs: Birkat HaBayit (Home Blessing), headed ברכת הבית, and Birkat HaEsek (Business Blessing), headed ברכת העסק. Both are ornamental plaques for display, not candle vessels.

Each selected design has its own molded Hebrew text and a separate rectangular stand mold. The lifestyle photographs focus on the Home Blessing; the Business Blessing can be identified in its own variant image. Each purchase includes one selected plaque mold and its matching stand mold, not both designs.

Key Features

• Two Hebrew blessings: Choose Birkat HaBayit (Home Blessing) or Birkat HaEsek (Business Blessing), each with its own Hebrew heading and inscription.
• Wavy silhouette: A gently curved, irregular top and side outline creates a softer look than a conventional rectangular plaque.
• Separate rectangular stand: The photographs show a second silicone mold for the small display block used to support a finished casting.
• Decorative casting: Suitable for appropriate plaster, gypsum and other compatible craft casting mixtures used according to their manufacturers' instructions.
• Flexible silicone: Permits careful peeling from fully cured castings, including around fine lettering.

Design and Size Guide

Birkat HaBayit – Hebrew Home Blessing

The lettered sample displays the Birkat HaBayit home blessing in a tiered arrangement, with the Hebrew heading at the top. Its supplied size photograph labels the finished plaque display at approximately 24.9 cm high × 17.2 cm wide (9.80 × 6.77 in), and gives an approximate plaster requirement of 610 g. These values describe the photographed sample and casting reference; they are not the silicone mold's outer dimensions or wax capacity.

Birkat HaEsek – Hebrew Business Blessing

The second option has the Hebrew heading ברכת העסק and lines of blessing text for a business. The corresponding variant photo shows its lettered silicone cavity alongside the rectangular stand mold. Exact finished dimensions and material quantities for this version are not confirmed by the Home Blessing photographs; do not apply the Home Blessing plaster amount to this design.

Basic Use Guidance

• Set the selected plaque mold and separate rectangular stand mold on a supported, level work surface.
• Prepare the chosen decorative casting material following its recommended mixing, protective equipment and curing instructions.
• Pour gradually; for both blessing designs, help the mixture reach the fine Hebrew characters and release trapped air gently where appropriate.
• Allow the components to harden fully before carefully peeling the silicone back, supporting the wavy outline and any lettering.
• After full curing, position the finished plaque in its stand and verify that the assembled piece is stable.

Candle safety: This is a decorative upright plaque mold, not a mold for a burnable candle or a tested candle vessel. Nearby candles in lifestyle photos are props; ordinary plaster, gypsum or resin castings are not automatically heat-safe.

Care and Storage

Gently remove casting residue and clean according to the casting material's instructions. Avoid blades and abrasive tools near small lettering or the wavy edge. Dry completely and store both silicone components without prolonged folding or compression.

Product Specifications

• Item: Decorative Hebrew Home Blessing or Business Blessing plaque and corresponding rectangular stand silicone casting mold set.
• Mold material: Silicone.
• Home Blessing finished sample: Approx. 24.9 × 17.2 cm (9.80 × 6.77 in).
• Home Blessing approximate plaster reference: 610 g for the pictured Home Blessing sample; no quantity is verified here for Business Blessing.
• Available designs: Birkat HaBayit – Home Blessing and Birkat HaEsek – Business Blessing.
• Intended use: Freestanding decorative casting and display.

Package Contents

One selected silicone plaque mold and its corresponding rectangular display-base mold. Finished plaques, casting materials, tealights, candle holders and fabric decorations shown in photos are not included.

Frequently Asked Questions

Does the kit include a display stand mold?

Yes. The illustrated mold set shows a separate rectangular mold used to cast the stand.

Is this a Shabbat candle-lighting prayer?

No. The two selectable inscriptions are Birkat HaBayit (Home Blessing) and Birkat HaEsek (Business Blessing), not the Shabbat candle-lighting blessing.

Will I receive both blessing designs?

No. Each selectable item is a single plaque-and-stand mold set. Choose Home Blessing or Business Blessing from the design selector.

Can the finished plaque hold a lit candle?

No candle-holding or heat-resistance claim is made. Keep finished decorative castings away from direct flame.

Where can I see related Judaica designs?

Explore our Judaica silicone molds and religious mold collection.

We offer free shipping to all countries we currently serve. Orders are processed within 1–3 business days. Delivery usually takes around 7–12 business days for most destinations, although some locations may take longer.

Once your order has shipped, you'll receive a confirmation email with tracking information. Tracking may take up to 48 hours to become active.

View full Shipping Policy

For return eligibility, return timeframes and refund information, please review our full Refund Policy.

View full Refund Policy