Lidded Nutcracker Candle Jar Silicone Mold
Product details
Create a classic Christmas character that hides a small container inside with the Lidded Nutcracker Candle Jar Silicone Mold. This clever two-piece design forms a complete standing Nutcracker soldier, while the sculpted head and tall decorative hat lift away to reveal the hollow vessel inside the body.
From the curled moustache and stylised hair to the military jacket, raised buttons, epaulettes, boots and ornamental scrollwork, the finished casting looks like a detailed Nutcracker figurine when closed. Remove the lid and the lower section becomes a compact decorative container or tested candle vessel.
Key Features
- Two-piece Nutcracker container: Creates a standing Nutcracker soldier with a hollow body and removable lid.
- Head-and-hat lid: The Nutcracker's sculpted face and tall ornamental hat form the removable upper section.
- Detailed Nutcracker face: Features a curled moustache, prominent nose, sculpted eyes and decorative hair.
- Military-style uniform: Raised buttons, jacket panels, shoulder details and ornamental trim cover the body.
- Freestanding soldier shape: Sculpted legs and boots complete the traditional Nutcracker silhouette.
- Integrated hollow cavity: The finished body contains a small inner compartment approximately 2.9 × 3 × 5 cm.
- Flexible silicone construction: Helps the detailed casting release gradually once the material has fully set.
- Reusable: Suitable for repeated Christmas craft and container-making projects when properly cleaned and stored.
Create a Christmas Nutcracker Container
The tall soldier shape makes this design decorative even when the container is closed. Cream, ivory and stone-inspired tones highlight the sculptural details, while traditional red, green and gold-inspired finishes can recreate the appearance of a classic Christmas Nutcracker.
For contemporary Christmas collections, blush, sage, pale blue or other pastel colours can give the same figure a softer finish. Raised buttons, scrollwork, facial features and uniform details naturally create highlights and shadows even when the finished casting is made in one colour.
The finished Nutcracker can be used as a decorative Christmas container for small lightweight items. Its removable lid allows the piece to retain the appearance of a complete figurine while concealing the cavity inside.
If you intend to turn the finished base into a candle vessel, use only a non-combustible, heat-resistant material that has been appropriately sealed and tested for candle use. Decorative resin, ordinary plaster, gypsum or concrete should not automatically be assumed safe for a burning candle.
Basic Casting Guidance
- Keep the silicone mold upright and securely supported on a stable, level surface.
- Prepare your chosen casting material according to the manufacturer's instructions.
- Pour gradually so material can reach the facial features, buttons, scrollwork and smaller uniform details.
- Release trapped air according to the recommendations for your chosen casting material.
- Allow the casting to become fully firm before attempting removal.
- Peel the silicone away gradually, taking additional care around the moustache, hat details, shoulders and boots.
Candle Vessel Guidance
The product images show an inner cavity of approximately 2.9 × 3 × 5 cm and an approximate wax fill of 25 g. These figures describe the internal space only and should not be used by themselves to determine wick size.
If developing the finished container into a candle vessel, choose the wick according to the actual internal dimensions, wax formulation and fragrance load, then complete full supervised burn testing. Always remove the Nutcracker lid before lighting the candle.
Care and Storage
Allow the mold to cool or the casting material to fully cure before cleaning the silicone gently with mild soap and lukewarm water. Avoid knives, abrasive brushes and other sharp tools inside the cavity, as these may damage the detailed relief. Dry thoroughly and store the mold in its natural shape away from direct sunlight and strong heat.
With the lid in place, the finished piece looks like a traditional standing Nutcracker figurine. Lift away the head and hat, and the hidden container inside gives the familiar Christmas character a practical second purpose.
Product Specifications
- Product Type: Lidded candle jar and decorative container mold
- Design: Traditional Nutcracker soldier with removable head-and-hat lid
- Decorative Details: Curled moustache, sculpted hair, ornamental hat, military jacket, raised buttons, epaulettes, scrollwork and boots
- Shape: Freestanding Nutcracker soldier container
- Material: Silicone
- Size: 16.5 × 6 × 5.7 cm (6.50 × 2.36 × 2.24 inches)
- Inner Cavity: Approx. 2.9 × 3 × 5 cm (1.14 × 1.18 × 1.97 inches)
- Approximate Wax Fill: 25 g
- Approximate Plaster Requirement: 335 g
- Reusable: Yes
- Recommended Use: Decorative container casting and tested candle-vessel projects
Wax fill and plaster figures are approximate values shown in the product images and may vary depending on material density, filling level and finishing method.
Package Contents
- 1 × Lidded Nutcracker Candle Jar Silicone Mold
Finished containers, wax, wicks and decorative accessories shown in product images are not included.
Frequently Asked Questions
Is this a solid Nutcracker candle mold?
No. The uploaded images show a hollow container design. The Nutcracker's body forms the vessel while the head and decorative hat form the removable lid.
How much wax fits inside the finished container?
The product images indicate an approximate wax fill of 25 g. Actual capacity may vary depending on wick displacement and filling level.
What size is the inner cavity?
The product images show an inner cavity of approximately 2.9 × 3 × 5 cm (1.14 × 1.18 × 1.97 inches).
How is this different from the Nutcracker Candle Jar mold?
This design creates a complete standing Nutcracker with a removable head-and-hat lid. The existing Nutcracker Candle Jar design is an open-top vessel and does not use this concealed lidded-container format.
Can I burn a candle inside a plaster or resin Nutcracker?
Do not assume a decorative casting material is suitable for candle use. A burning candle should only be made inside a properly tested, non-combustible and heat-resistant vessel material using an appropriate sealing and testing process.
Should the Nutcracker lid remain on while the candle is lit?
No. Always remove the decorative lid before lighting a candle inside the finished vessel.
How should I demold the detailed Nutcracker?
Allow the casting to become completely firm before removal. Peel the silicone away gradually, taking particular care around the moustache, nose, hair, shoulder details and ornamental hat.
```
Shipping & returns
We offer free shipping to all countries we currently serve. Orders are processed within 1–3 business days. Delivery usually takes around 7–12 business days for most destinations, although some locations may take longer.
Once your order has shipped, you'll receive a confirmation email with tracking information. Tracking may take up to 48 hours to become active.
For return eligibility, return timeframes and refund information, please review our full Refund Policy.
Choose options