Mezuzah Case Silicone Mold โ Shin, Flame & Brick Styles
Product details
Make a decorative mezuzah-style case with a choice of Hebrew Shin, sculpted flame, brick-textured and rounded details. The flexible silicone molds reproduce slim, upright case forms with a recessed back and a matching separate backing-piece mold. Choose from 22 actual design-and-size combinations across nine visible motif families.
Each selected option produces one distinctive cast case, not a complete assortment. The finished pieces can be made with appropriate decorative casting materials such as plaster, mineral casting compounds or properly handled concrete mixes. The images show cream and sand-colored finished samples to illustrate surface details; they are not selectable colors.
Key Features
- Judaica-inspired details: Designs include the Hebrew letter Shin, stylized flame reliefs, brick-like surfaces and rounded tops.
- Two mold components per choice: A cavity mold for the case body and a separate long backing-piece mold, shown beside it in the variant photographs.
- Real size choices: Small, Medium and Large vary by pattern. Not every design comes in every size.
- Recessed compartment: The supplied dimension illustrations show an interior opening in each cast design; check the actual requirements of anything you intend to place inside.
- Flexible silicone: Supports careful peeling after full curing, including around small raised motifs.
Choose Your Design and Size
The selectable options are grouped by their visible design. Measurements below are approximate finished case lengths shown in the images, not exterior dimensions of the silicone mold.
- Triple Flame Diamond: Small 12.7 cm; Medium 14.7 cm; Large 17.7 cm.
- Hebrew Shin Relief: Small 12.7 cm; Medium 14.6 cm; Large 17.6 cm.
- Brick-Textured Shin: Medium 14.7 cm; Large 17.7 cm.
- Rounded Shin: Medium 14.7 cm; Large 17.6 cm.
- Wide Flame Relief: Small 12.8 cm; Medium 14.8 cm; Large 17.7 cm.
- Top & Base Flame: Medium 14.6 cm; Large 17.6 cm.
- Curved Flame Relief: Small 12.7 cm; Medium 15.2 cm; Large 17.5 cm.
- Flame Crest: Medium 14.6 cm; Large 17.6 cm.
- Three-Wave Relief: Medium 14.6 cm; Large 17.6 cm.
Basic Use Guidance
- Place the selected body mold and backing-piece mold on a firm, level surface.
- Prepare your compatible casting material in accordance with its mixing, ventilation and curing instructions.
- Fill the fine Hebrew letter or flame details gently and release trapped air before curing.
- Allow each piece to cure fully; peel the silicone away gradually instead of pulling at narrow edges or raised symbols.
- After full curing, check the fit of the backing piece and follow the casting material's recommendations if joining or finishing the parts.
For use as a functional mezuzah case, independently check scroll fit, fastening, weather protection and relevant religious requirements. No mezuzah scroll or certification is included. This is not a candle, candle-holder or heat-tested vessel mold.
Care and Storage
Remove casting residue gently, clean and dry both silicone mold components after use, and avoid sharp scraping tools near the fine reliefs. Store flat or in their natural shape without crushing the long cavities.
Product Specifications
- Product: Decorative mezuzah-style case and backing-piece casting molds.
- Material: Silicone.
- Selections: 22 design-and-size combinations across nine motif families.
- Finished case dimensions pictured: Length approximately 12.7โ17.7 cm (5.00โ6.97 in), width 2.9โ4.7 cm (1.14โ1.85 in), depth 2.5โ2.9 cm (0.98โ1.14 in), according to the chosen style.
- Interior recess pictured: Length 10, 12 or 15 cm (3.94, 4.72 or 5.91 in); nominal width 1.5 cm (0.59 in) and depth 1.4โ1.5 cm (0.55โ0.59 in), depending on the selected design.
- Application: Decorative Judaica casting and craft projects.
The dimensions refer to photographed cast samples and interior recesses. Match the option image to your selected style for its specific measurements; do not use these ranges as exact mold exterior sizes or guaranteed ritual-scroll capacities.
Package Contents
One selected silicone mold for a mezuzah-style case body and one corresponding silicone backing-piece mold, as pictured. Finished castings, scrolls, adhesives, mounting hardware, decorative fabrics and casting materials are not included.
Frequently Asked Questions
Does every design come in Small, Medium and Large?
No. The available combinations differ by motif. Choose the exact design and size from the selector; no unlisted combinations are included.
Is a parchment scroll included?
No. This listing provides the selected casting molds only. Scroll compatibility and installation need to be checked separately.
Can I use these molds for candle making?
These molds are intended for decorative casting of mezuzah-style case components. They are not candle or candle-container molds.
Where can I explore other Judaica designs?
See our Judaica silicone molds and religious designs collection.
Shipping & returns
We offer free shipping to all countries we currently serve. Orders are processed within 1โ3 business days. Delivery usually takes around 7โ12 business days for most destinations, although some locations may take longer.
Once your order has shipped, you'll receive a confirmation email with tracking information. Tracking may take up to 48 hours to become active.
For return eligibility, return timeframes and refund information, please review our full Refund Policy.
Choose options