Wavy Hebrew Prayer Plaque Silicone Mold with Stand – 5 Designs

Cast a freestanding Hebrew prayer or blessing plaque with an asymmetric wavy outline and separate rectangular display stand. This silicone mold set comes in five selectable designs: Birkat HaBayit (Home Blessing), Birkat HaEsek (Business Blessing), Mizmor LeTodah (Psalm 100), the Shabbat candle-lighting blessing, and a plain, unlettered wavy plaque.

Each option forms a broad, gently curved plaque supported by a separately cast rectangular base. The Hebrew lettering varies by design, while the blank version leaves the front undecorated. The photographed cream-colored castings illustrate finished results; their color, nearby candles and fabric props are not selectable options or included accessories.

Key Features

• Five distinct choices: Four named Hebrew text designs and one plain wavy plaque.
• Asymmetric wave-edge shape: A softly rising, irregular outline creates a freestanding sculptural display piece.
• Matching rectangular stand mold: The plaque and its support block are molded separately for assembly after curing.
• Raised lettering on finished text designs: The molded Hebrew inscription is visible across the front surface.
• Flexible silicone: Allows careful removal after the selected decorative casting material has fully hardened.

Choose Your Plaque Design

• Home Blessing — Birkat HaBayit: The Hebrew heading ברכת הבית appears above a multi-line home blessing. The sample image labels the finished display at approximately 24.9 cm high × 17.2 cm wide (9.80 × 6.77 in), with an approximate plaster requirement of 610 g.
• Business Blessing — Birkat HaEsek: The heading ברכת העסק is followed by a blessing for a business. The photographed display is approximately 25 × 17.2 cm (9.84 × 6.77 in), with a plaster reference of 585 g.
• Mizmor LeTodah — Psalm 100: A denser Hebrew text design headed מזמור לתודה. The photographed display is approximately 25 × 17.2 cm (9.84 × 6.77 in), with a plaster reference of 648 g.
• Shabbat Candle-Lighting Blessing: A shorter Hebrew blessing ending in להדליק נר של שבת. The finished display shown is approximately 25 cm high × 17 cm wide (9.84 × 6.69 in), with a plaster reference of 616 g.
• Blank Wavy Plaque: The same overall wavy silhouette without molded Hebrew lettering; it can be decorated after casting if the chosen finish permits. No specific finished dimensions or plaster quantity are verified for the blank option.

One selected design is included per purchase, not all five. The listed dimensions refer to finished examples in the photographs, not the outer dimensions of the silicone molds. Plaster amounts are approximate illustrated references, not wax quantities.

Basic Use Guidance

• Place the selected plaque mold and rectangular stand mold on a level, supported surface.
• Prepare plaster, gypsum or another suitable decorative casting material following its manufacturer's mixing and curing instructions.
• Pour gradually, paying particular attention to the fine Hebrew characters on the text designs. Release trapped air gently as appropriate for the material.
• Allow both components to cure completely before carefully peeling away the silicone, supporting delicate letters and the curved edge.
• Once fully cured, fit the plaque into the display base. Check stability before placing it on a shelf or table.

Candle safety: These are decorative upright plaques, not burnable candle shapes or candle containers. Ordinary plaster, resin and cement castings are not automatically heat-safe. Keep finished plaques clear of direct flame; candles pictured are styling props.

Care and Storage

Remove casting residue gently from the inscription details, clean according to the material used and allow both silicone molds to dry before storage. Avoid sharp tools and prolonged folding or compression that could distort the wavy edge or small text.

Product Specifications

• Product type: Decorative Hebrew prayer and blessing plaque casting mold with separate display stand mold.
• Material: Silicone.
• Selectable designs: Five; see the design guide above.
• Approximate finished text-plaque dimensions shown: 24.9–25 cm high and 17–17.2 cm wide (9.80–9.84 × 6.69–6.77 in), depending on the chosen inscription.
• Approximate plaster references shown: Home Blessing 610 g; Business Blessing 585 g; Mizmor LeTodah 648 g; Shabbat Candle-Lighting Blessing 616 g.
• Intended application: Decorative plaster and compatible craft casting projects.

Package Contents

One silicone plaque mold in the chosen design and one matching rectangular stand silicone mold. Finished plaques, casting materials, candles, candle holders and other display props are not included.

Frequently Asked Questions

Do I receive all five prayer designs?

No. Choose one design from the selector; only that design's plaque mold and matching display-base mold are included.

What is the difference between the Home and Business Blessings?

Birkat HaBayit has a home-blessing inscription, while Birkat HaEsek is a business-blessing inscription. Their Hebrew headings and text layouts differ.

Is the blank plaque a separate option?

Yes. It has the same wavy style without molded text, making it suitable for your own decorative finish after casting.

Can these molds be used for candles?

The intended result is a freestanding decorative plaque with a base, rather than a candle or a tested candle vessel. Do not assume the finished casting is suitable for contact with flame.

Where can I find more Judaica molds?

Browse our Judaica silicone molds and religious mold designs.

We offer free shipping to all countries we currently serve. Orders are processed within 1–3 business days. Delivery usually takes around 7–12 business days for most destinations, although some locations may take longer.

Once your order has shipped, you'll receive a confirmation email with tracking information. Tracking may take up to 48 hours to become active.

View full Shipping Policy

For return eligibility, return timeframes and refund information, please review our full Refund Policy.

View full Refund Policy